List of Accepted Papers (Alphabetically Ordered with the First Author's Last Name):

• Object shape-based methodology for optical analysis of contaminated engine lubricants, Aghayan, H., Bordatchev, E., and Yang, J.
• Line scanning confocal microscopy with the use of cross structured illumination, Ahn, M., Kim, T., Kim, Y., and Gweon, D.
• Nano-fabrication dependent quality factor in photonic crystal slab biosensors, Akhavan, H., El-Beheiry, M., and Levi, O.
• A data fusion approach for multi-camera based visual servoing, Assa, A., Janabi-Sharifi, F., Mantegh, I., and Moshiri, B.
• Open-loop adaptive optics with closed-loop control of deformable mirror, Badkoubeh, A., Zhu, G., and Beguenane, R.
• Design and fabrication of 2x2 and 4x4 biaxial micromirror array, Bai, Y.
• Mechanical sensitivity enhancement of silicon based photonic crystal micro-pressure sensor, Bakhtazad, A., Sabarinathan, J., and Hutter, J.
• Quantitative phase retrieval, Barbastathis, G.
• Optimization of optical thin films deposition using in-situ reflectivity measurements and simulation, Bhatt, G., Kheraj, V., Panchal, C., and Desai, M.
• Edge extraction in x-ray image based on COD of materials, Cho, S.
• Experimental statistical analysis of laser micropolishing process, Chow, M., Hafiz, A., Bordatchev, E., Tutunea-Fatan, R., and Knopf, G.
• A lunar laser ranging retroreflector array for the 21st century, Currie, D.
• 3D simulation of transient heat transfer in human eye using finite element method, Dehghani, A., Moradi, A., and Jafari, R.
• A new type of spectrometer for confocal-spectral microscopy, Do, D., Chun, W., and Gweon, D.
• Measurement of thermally induced deformations by means of phase retrieval, Falldorf, C., Agour, M., von Kopylow, C., and Bergmann, R.
• Utilization of full spectrum space in single-sensor-based optical dynamic measurement, Fu, Y., Guo, M., and Phua, P.B.
• Detection of touch event with a camera-based user interface, Fujieda, I.
• Spectral imaging with a modified document scanner, Fujieda, I.
• Design and temperature analysis of ZDSF based on triangular graded-index single-mode, Ghanbari, A., Janabi-Sharifi, F., Makouei, S., and Rostami, A.
• All-optical switching using microring resonators including quantum-dots, Ghanbari, A., Janabi-Sharifi, F., and Rostami, A.
• Quantum-wire conductance manipulating by asymmetric quantum dot-molecules, Ghanbari, A., Janabi-Sharifi, F., and Rostami, A.
• Enlarging effective mode area of photonic crystal fibers using defected core structures, Ghanbari, A., Janabi-Sharifi, F., Soofi, H., and Rostami, A.
• Adaptive particle filter based pose estimation using a monocular camera model, Goli, M., Ghanbari, A., Janabi-Sharifi, F., and Karimian Khosroshahi, G.
• Autofocusing-based visual servoing: application to MEMS micromanipulation, Guillaume, D., Brahim, T., Nadine, L.P., Marchand, E., Guillaume, F., and Sounkalo, D.
• A hybrid EFG-FE analysis for DOT forward problem, Hadinia, M., and Jafari, R.
• A high-order finite element method for forward problem in diffuse optical tomography, Hadinia, M., and Jafari, R.
• Extraction of unique pixels based on co-occurrence probability for high-speed template matching, Hashimoto, M., Fujiwara, T., Koshimizu, H., Okuda, H., and Sumi, K.
• Optimization of computer-generated hologram using second harmonic generation, Hayasaki, Y.
• Unification of satellite and medical scan methods, Haylock, T., Cenko, A., Meade, J., Kazemzadeh, F., and Hajian, A.
• Resolution enhancement by time-multiplexed acquisition of sub-pixel shifted images using an SLM, Hildebrand, A., Falldorf, C., von Kopylow, C., and Bergmann, R.
• Depth-of-field extension through focal plane oscillation and variable annular pupil, Hong, D., and Cho, H.
• Dynamic phase measurement by clustering method, Huang, Y.
• Optical system for fast inspection of hermetic seals in electronic packages, Huang, Y.
• A 100Hz real-time sensing system of textured range images, Ishiyama, H., Terabayashi, K., and Umeda, K.
• Adaptive color enhancement based on multiscaled retinex using local contrast of the input image, Jang, I., Lee, T., Ha, H., and Ha, Y.
• Novel noncontact temperature fiber sensor for multi-spot field measurements, Jurca, M.
• Model shape oriented robust matching of dot cloud data based and its application to defect reco, Kaneko, S., Takauji, H., Hidenori, M., and Kayaba, H.
• Thermal diffusion simulations for photothermal oscillators, Kawakami, K.
• Liquid crystal lens with two divided and double circularly hole-patterned electrodes, Kawamura, M.
• A dual wafer prealigner and a multiple level structure, Kim, H., Kang, S, and Cho, Y.
• Smart wearable robot glasses for human visual augmentation, Kim, M.Y.
• Compensation of repeatable and nonrepeatable disturbances in SIL-based NF storage systems, Kim, J.
• Coordinate measurement of micro groove on MEMS devise by optically controlled microprobe, Kobayashi, M., Michihata, M., Hayashi, T., and Takaya, Y.
• A separability index based on Earth mover's distance for local evaluation of fusion systems, Lamallem, A., Valet, L., and Coquin, D.
• Development of alignment inspection system for ball grid array packaging, Lee, H.
• Fast phase-based stereo matching method for 3D shape measurement, Li, D., Zhao, H., and Jiang, H.
• Design and primitive study of a cylindrical traveling wave ultrasonic motor using outer excitat, Liu, J.
• Characterization on all effective parameters of anisotropic optical material using Stokes, Lo, Y., and Thi Thu Hien, P.
• A new study on projection speckle digital correlation for surface out-of-plane deformation meas, Lu, H.
• Robot task planning with a PbD-based trajectory learning, Mantegh, I.
• Control of self-organization microporous honeycomb film by the irradiation of nano second laser, Matsumura, Y., Inami, W., and Kawata, Y.
• Optically driven method for magnetically levitated material using photothermal effect, Mizutani, Y., and Otani, Y.
• Shape measurement by light-stepping method using LEDs, Morimoto, Y.
• Development of an interface based on face orientations for operation of auto-wheelchair, Nakazawa, N., Kim, I., Matsui, T., and Yamada, K.
• An obstacle segmentation and classification system for the visually impaired, O' Callaghan, K., and O' Mahony, M.J.
• A real-time stereo vision sensor based on FPGA realization of orientation code matching, Ohmura, I.
• Light driven motor using shape memory alloy, Okamura, H.
• Modeling stereo measurement error by considering camera vibration, Okazaki, S., Tanaka, T., Kaneko, S., Takauji, H., Kochi, N., and Yamada, M.
• Manipulation of droplet and crystal growth by Paul effect, Otani, Y., Yamabe, Y., and Mizutani, Y.
• Design and analysis of resonant drive circuit for electrostatic actuators, Park, S., Bai, Y., and Yeow, J.
• Illumination compensation method for local matching Gabor face classifier, Perez, C., Castillo, L., and Cament, L.
• A vision based micro-assembly system for assembling components in mechanical watch movements, Qi, Q., and Du, R.
• A patterned illumination and phase integration imaging method for high-gloss surface evaluation, Roh, Y., Jeong, D., Shim, H., and Kim, S.
• Performance enhancement of organic solar cells using plasmonic effects, Rostami, A., Janabi-Sharifi, F., and Andalibi, S.
• Zero-dispersion wavelength and mode field diameter managements of ZDSF by optimization technique, Rostami, A., Janabi-Sharifi, F., and Makouei, S.
• Finite difference modeling of bipolar OLED, Rostami, A., Janabi-Sharifi, F., and Naghinejad, P.
• Proposal for 1x4 ultracompact arrayed waveguide grating based on Si-nanowire spirals, Rostami, A., Janabi-Sharifi, F., and Sattari, H.
• Rapid clustering of colorized 3D point cloud data for reconstructing building interiors, Sareen, K., Knopf, G., and Canas, R.
• Sensor system for adaptive tracking by using cone-shaped laser beam, Shim, H.
• Laser-assisted active microfluidic mixer, Shiu, P., Knopf, G., Ostojic, M., and Nikumb, S.
• Optical coherence tomography: current biomedical applications and future clinical utility, Standish, B., Leung, M., Mariampillai, A., and Yang, V.
• Research on the model of spectral BRDF for space target surface material, Sun, C., Yuan, Y., Zhang, X., Wang, Q., and Zhou, Z.
• Gesture recognition based on the detection of periodic motion, Takahashi, M., Irie, K., Terabayashi, K., and Umeda, K.
• Robotic platform for real-time tracking of a single fast swimming bacterium, Tremblay, C.
• Measurement and compensation of deformations in coordinate measurement arm, Vrhovec, M., Kova, I., and Munih, M.
• Sinusoidal fringe-pattern projection for 3-D surface measurement with variable illuminance, Waddington, C., and Kofman, J.
• Saturation avoidance by adaptive fringe projection in phase-shifting 3D surface-shape measurement, Waddington, C., and Kofman, J.
• Diamagnetically levitating motor with improved optical feedback reference tracking, Wang, W., Ho, J., and Khanna, S.
• Development of a polymer based fiberoptic magnetostrictive metal detector system, Wang, W., Hua, W.S., and Wu, W.
• 2-D mechanically resonating fiberoptic scanning display system, Wang, W., and Tsui, C.
• Inline coherent imaging of laser micromachining, Webster, P., Yu, J., Leung, B., Wright, L., Mortimer, K., and Fraser, J.
• Recognition and tracking of magnetic nanobots using MRI, Wortmann, T., Dahmen, C., Geldmann, C., and Fatikow, S.
• Automatic stitching of micrographs using local features, Wortmann, T.
• Advanced optical methods for whole field displacement and strain measurement, Yang, L., Wang, Y., and Lu, R.
• Pose-relay videometric method and ship deformation measurement system with camera-series, Yu, Q., Fu, S., Jiang, G., and Lei, Z.
• Some recent advance on high-speed, high-resolution 3-D shape measurement using projector defocusing, Zhang, S., Gong, Y., Laughner, J., and Efimov, I.